Tag Archives: nComputing

Citrix Ready WorkspaceHub Tech Preview (TP) Getting Started?

The following content is a brief and unofficial prerequisites guide to setup, configure and deploy the Tech Preview of the Citrix Ready WorkspaceHub using an Android Receiver on a mobile smart phone (April 2018) with XenApp & XenDesktop 7.6+ LTSR. The views, opinions, and concepts expressed are those by the author of this entry only and do not necessarily conform to industry descriptions or leading best practises. The views expressed here are my own and do not necessarily reflect the views of Citrix.

Shortened Names
SECURITY – sec
NETSCALER – ns
NETSCALER GATEWAY SERVICE – nsg service
WINDOWS – win
XENAPP – xa
XENDESKTOP – xd
XENAPP/XENDESKTOP – xad
WORKSPACEHUB – wh

Introduction
Citrix has recently announced the availability of the Tech Preview of the Citrix Ready WorkspaceHub at – https://www.citrix.com/blogs/2018/04/04/its-here-download-the-citrix-ready-workspace-hub-tech-preview-today/. So what exactly is it? Its a Raspberry Pi 3 platform at its core with Citrix technology + innovation built into it to provide a number of innovative capabilities for the Digital Workplace #thisishowthefutureworks. For me seeing is believing so the below embedded Tweet by Bas Stapelbroek – @hapster84 or https://twitter.com/hapster84 is a short video clip that demonstrates just one of the many powerful capabilities (sign-on to a thin client using a QR code while your virtual desktop still runs on your smart phone smooth roaming +++++ I like to say) available as part of the Citrix Ready Workspace Hub.

Full credit of the above goes out to Bas Stapelbroek – @hapster84 and thank you for allowing me to include it in my blog post.

You’re probably asking yourself how do you manage them you ask? You leverage Stratodesk NoTouch – https://www.stratodesk.com/products/workspace-hub/ whom work with our supported Citrix Ready Partners that provide the Citrix Ready WorkspaceHub for Internal or external you can use Citrix XenMobile+.

Please visit the StratoDesk webpages for nComputing – https://www.stratodesk.com/products/workspace-hub/ncomputing-rx-hdx-citrix/ and ViewSonic – https://www.stratodesk.com/products/workspace-hub/viewsonic-sc-t25-citrix-hdx-ready-pi/ for more details around the capabilities, specifications e.t.c of each platform.

You can put the device down and lock it but be sure to refer to *page 14 for helpful tips.

Pre-requitstes & System Requirements
You’ll need to sign-up to the Tech Preview program at – https://podio.com/webforms/20685654/1419376 however I urge you to please please please read through this Citrix Forum Discussions post at – https://discussions.citrix.com/topic/394304-welcome-to-the-tech-preview-of-the-citrix-ready-workspace-hub/ and finally you should before you get started once you have your h/w and have been accepted into the program read through the the TP documentation available at – * https://docs.citrix.com/content/dam/docs/en-us/xenapp-xendesktop/current-release/downloads/workspace-hub-preview-2018.pdf which is the below in more detail.

– Your require at a bare minimum XenApp 7.6 LTSR environment running 7.6 VDA for Windows Server (remember this is a Tech Preview ONLY as of April 2018)
– You require a physical Citrix Ready WorkspaceHub device – http://citrixreadyprogram.com/workspace-hub/ which currently includes thin client vendors in alphabetical order nComputing and ViewSonic. If you have had it for a while e.g 2017 firmware please read pages 2 (end)-3(top) for instructions on where to obtain the firmware updates. See page 2 for full h/w details.
– TP only supports Android Receiver 3.13.5 or later for Mobile devices + Bluetooth for
– Networking persecutive your require Android smart phone and WorkspaceHub to be on the same Wi-Fi network with the following open ports 55555, 55556 (default port for SSL connections) and ports 1494 and 8500 must not be blocked for Citrix Casting to work between the Android Receiver on Mobile Device <-> Citrix WorkspaceHub.
– Internal centralised management utilises Stratodesk https://www.stratodesk.com/kb/Main_Page to get started or for external management you can use XenMobile+ also on page 3.
– If you’re looking for Skype for Business support check out page 5
– Recommended HDX Graphics Mode and policy for the TP is to set and enable H.264 for fullscreen the policy is “Use video codec for compression” setting to “For the entire screen
– Setting up Receiver page 7 ensuring that you DO NOT SELECT e.g UNTICK “Add account type as Web Interface” and during the setup you’ve need to complete the Touch-Free mode for proximity authentication enabled vs. disabled page 8-9. Now test the proximity referring to page 10.
– Setting up the session roaming with a QR code, TLS/SSL (requires SHA256is covered in pages 11-15 with Stratodesk NoTouch
– Please please please read through thoroughly the known limitations within the TP on page 16 and finally there is Citrix Discussions Forum available for support during the TP at https://discussions.citrix.com/forum/1726-citrix-ready-workspace-hub-preview/.

In Closing
I hope you found this blog post useful as I have written it due to the number of people contacting me via social platforms, Slack and of course traditional communications like telephone calls, text/sms and yes email. A final thought, be sure to check out a short demonstration + talk on Citrix Casting and a lot more detail at – https://www.citrix.com/products/citrix-workspace/iot.html.

Disclaimer
Please read the “Citrix Ready Workspace Hub PreviewDisclaimerCitrix Ready Workspace Hub Preview Citrix Ready Workspace Hub Preview” on page 1* and a note to Citrix Investors is listed at the bottom of the blog post announcement of the TP program of the Citrix Ready WorkspaceHub at – https://www.citrix.com/blogs/2018/04/04/its-here-download-the-citrix-ready-workspace-hub-tech-preview-today/.