The views, opinions expressed are those by the author of this entry only.
What is a X1 Mouse?
Its a special mouse that allows you to interact with HDX published resources form XenApp or XenDesktop using Citrix Receiver on iOS or Android –http://www.citrix.com/products/mouse/overview.html. In plain English it allows you utilise the X1 Mouse with Windows apps & desktops using the Citrix Receiver on any iOS device that supports the Citrix Receiver which can be downloaded from the UK Apple app store at – https://itunes.apple.com/gb/app/citrix-receiver/id363501921?mt=8.*
The X1 Mouse is also compatible with the following with iOS apps GoToMyPC, ShareConnect and WorxDesktop reference the support page at – http://www.citrix.com/products/mouse/support.html and the datasheet as of 15/05/2015.
* Please do not use this link unless your app store on your iOS device(s) is configured to the UK. If your in another country please from your iOS device open the Apple app store and search for Citrix Receiver and tap to install it.
XenDesktop Master Class July 2014 – HDX 3D Pro with NVIDIA GRID
Although this was recorded in July 2014 there is a lot of useful knowledge and fundamentals in relation to HDX 3D Pro.
The following content is a brief and unofficial prerequisites guide to setup, configure and test XenMobile 10.0 prior to deploying in a PoC, Pilot or Production environment by the author of this entry. The views, opinions and concepts expressed are those by the author of this entry only and do not necessary conform to industry descriptions or best practises.
Shortened Names
XENMOBILE – xm
XENMOBILE SERVER – xms
VIRTUAL APPLIANCE – v/a
FEDERAL INFORMATION PROCESSING STANDARDs – fips
NETSCALER GATEWAY – nsg
VIRTUAL IP ADDRESS – vip
MOBILE APPLICATION MANAGEMENT – mam
MOBILE DEVICE MANAGEMENT -mdm
What’s New
1: XenMobile is now a single unified hardened Linux virtual appliance.
2: Complete overhaul of the Web UI which dramatically simplifies policy setup & configuration of MDM + MAM policies and it allows for the management of multiple platforms within a single policy.
3: Built-in V6 Citrix Licensing server provides a 30 day trial/evaluation and also support for remote V6 CTX licensing server.
4: Built-in PostgreSQL database recommended for PoC’s and there’s also support for remote MS SQL database which is recommended for production deployments.
4: XMS V/A includes IPtables which is a Linux firewall – http://en.wikipedia.org/wiki/Iptables.
5: XMS placement is in the DMZ. The V/A is hardened and is FIPS 140-2 compliant and remember you data is actually stored in a MS SQL database unless your utilising PostgreSQL database within the XMS V/A.
6: Traffic flow and ports between NetScaler Gateway and the XenMobile Server (XMS) have changed please refer to eDocs for an architecture overview of the changes at – http://support.citrix.com/proddocs/topic/xenmobile-10/xmob-arch-overview-con.html.
7: The Admin Web UI is now on https://XMS-FQDN:4443/. This port is not configured as part of the XenMobile 10 wizard on NetScaler Gateway build 10.5-55.8 which means that you will not be able to access the mgmt. Admin Web UI from the internet it will only be accessible from the DMZ and the TRU network dependant upon your firewall(s) ACL list.
8: New WorxHome build 10.0.3.83 which is also backwards compatible from XenMobile 10.x.n
9: The XenMobile NetScaler Connector (XNC) currently is still a separate Windows Server.
9: You can find our more by watching the following Mobility Master Class: What’s New in XenMobile 10 available from Citrix TV.
– Citrix v6 licensing file for either local or remote. Remote is recommended for H/A purposes.*
– Microsoft Active Directory (AD) ip addr or FQDN, base DN, domain, search service account with read-only permissions.
– Certificate in *.p12 or *.pfx format for the SSL_Listener which is used for two way secure HTTPS communication to the XMS V/A.
– APNS certificate.
– Separate MDM and MAM+ FQDN’s correctly setup in DNS with fwd and reserve lookup’s configured and each configured with its own static IP addr for external resolution.
– 3x VIP for configuring XenMobile 10 with NetScaler Gateway 10.5.55.8 +. You can find a compatible NSG V/A version and builds at – http://support.citrix.com/proddocs/topic/xenmobile-10/xmob-10-understand-compatibilitymatrix-con.html.
– MS SQL Database server configured to accept traffic and with write/read privileges to create and manage the remote XMS database.
– Mail server configuration which enables and provides workflow email messages, notifications to users e.t.c
6: Follow the onscreen prompts and once completed the web UI deployment wizard then you have successfully deployed a XMS V/A. Please not reboot the XMS V/A so that the existing SSL certificates for HTTPS can be unbound and the newly uploaded SSL cert(s) can be bound to HTTPS.
7: You may now setup a XMS cluster and configure H/A with a NSG and thereafter begin configuring your XenMobile 10.0 environment. See the H/A section for a how-to.
8: Logon to one of the XMS v/a direct IP addr e.g https://XMS:4443/ if in H/A fronted by the NSG as the XenMobile 10 wizard will not configure 4443 which means that you cannot access the mgmt interface via the VIP owned by the NSG. This means that the mgmt interface is not accessible either internally or externally on the FQDN that resolves the VIP owned by the NSG.
9: Scaling XenMobile 10.0 from 1000 up to 100,000 devices – http://support.citrix.com/proddocs/topic/xenmobile-10/xmob-scaling-xm.html.
XMS V/A High-Availability (H/A)
1: Prior to understanding how-to setup a XMS H/A or clustering you need to understand that the minimum requirements are for a remote CTX v6 licensing server and MS SQL database as the XMS V/A do not hold any user/cfg information this is all held in the remote database.
2: Once your have setup XMS follow the prompts in the CLI to enable clustering and configure the IPtables firewall ACL and then finally shut it down and clone it.
3: Rename the cloned XMS V/S to your required naming convention and then boot up the cloned XMS V/A login to the CLI and changed the IP addr and ensure that the IPtables firewall ACL ports are correctly enabled then shutdown the V/A.
4: Boot the first XMS V/A and then 60 seconds later boot the cloned XMS V/A and login to the CLI to very the cluster is enabled and then login into the XMS admin WebUI to verify that the cluster is up and functioning as expected. The original XMS V/A will be the oldest in the cluster.
5: You can now proceed to setting up the load-balancing for the XMS V/A’s with NSG to service MDM + MAM requests.
Deploying XM 10 with NetScaler Gateway 10.5.x.n (Draft)
1: Before beginning its worth mentioning that the way I will be describing how-to deploy XenMobile 10 in this blog article will be to utilise to external static IP addr’s + FQDN’s that are NATed to DMZ IP addr’s and I will utilising SplitDNS for device mgmt. in/outside of my TRU network. I will also be implementing the described XenMobile 10 environment below utilising an SSL Bridge although offloading includes a few more minor steps the intention of this section is aimed at helping you front your XenMobile 10.0 deployment with a NSG 10.5.x.n V/A.
2: Please review the following CTX article entitled “FAQ: XenMobile 10 and NetScaler 10.5 Integration” – http://support.citrix.com/article/CTX200430 which will aid you in been able to setup and configure load-balancing for XMS V/A’s, mVPN for Worx’s apps for XenMobile 10 with NetScaler Gateway 10.5.x.n.
3: You’ll require the following prior to be beginning:
– Correct NetScaler (Gateway) build +_ version the NSG version + build I’ll be discussing here is NetScaler Gateway 10.5.55.8 MR5 but you can check the latest supported version + builds at – http://support.citrix.com/proddocs/topic/worx-mobile-apps/xmob-10-understand-compatibilitymatrix-con.html
– 1x FQDN for MDM e.g. mdm.axendatacentre.com * that resolves to both external internet routable static IP addr and your internal assigned static IP. Please note that this should match exactly the FQDN entered in at the time of the deployment of your XMS V/A during the first phase in the CLI the text your looking for is/was “XenMobile Server FQDN:” and its highlighted in yellow. It is also worth/noting that if you have utilised an internal domain e.g xms.abc.local as the FQDN this will only manage devices internally as that FQDN is not routable on the internet so you’ll only be able to manage devices INSIDE of the trusted network to its recommended to a FQDN that is internet routable and you can utilise SplitDNS to manage traffic requests to the NSG VIP’s for XenMobile.
– 1x FQDN for MAM (Worx’s Apps) e.g. mobileapps.axendatacentre.com * that resolves to both external internet routable static IP addr and your internal assigned static IP
– 2x External routable internet IP addr’s * e.g 8.8.8.8 which most IT Pro’s utilise to ping to check internet connectivity
– 3x Internal IP addr’s owned by the NSG as VIP
|- 1x for MDM
|- 1x for MAM Gateway
|- 1x for Load-balancing IP
– Wildcard certificate for your domain e.g *.domain.com
– If your implementing SSL Offloading (HTTP) of your XenMobile traffic for MAM then you’ll require the devices cert from the XMS V/A which can be downloaded from the XMS Web AdminUI at https://xms:4443/
4: Setup the NetScaler Gateway configuration within the Admin WebUI of the XMS V/A following the process outlined at – http://support.citrix.com/proddocs/topic/xenmobile-10/xmob-netscaler-gateway.html its fairly straight forward and simple.
5: Login into the NSG Admin WebUI interface and click the XenMobile Wizard in the bottom left-hand corner and then you’ll be prompted to setup either XenMobile 9.0 or XenMobile 10.0 please selected XenMobile 10.0 and click “Get Started” to continue.
6: Ensure that “Access through NetScaler Gateway” which is for MAM, “Load Balance XenMobile Servers” which is for MAM are checked they should be by default, however you know have the opportunity to deselect either if one depending upon your deployment scenario/use case and obviously your acquired license. The current XenMobile 10 datasheet is available at – https://www.citrix.com/content/dam/citrix/en_us/documents/products-solutions/citrix-xenmobile-the-revolutionary-way-to-mobilize-your-business.pdf.
7: Enter in your first VIP for the MAM Gateway then port should be 443 and provide a suitable name.
8: Select your previously uploaded SSL certificate (I am utilising a wildcard cert for my domain *.axendatacentre.com) or upload your SSL cert.
9: Create your (s)LDAP binding you will need to provide the following:
– LDAP IP addr
– LDAP Port default is 389
– Base DN e.g Cn=Users,dc=axendatacentre,dc=com
– Service account username & password
– Timeout default is 3 seconds
– Server Login sAMAccountName or UserPrincipalName (SuGgEsTeD)
10: Now enter in your MDM FQDN and then the Load-balancing IP addr beneath and accept the default port of 8443. You can now also choose to select HTTPS (SSL Bridge) vs. HTTP (SSL Offload) and you can choose your DNS mode including split tunnelling.
11: Select your previously uploaded SSL certificate (I am utilising a wildcard cert for my domain *.axendatacentre.com) or upload your SSL cert.
12: Enter in your MDM VIP and you’ll notice the default ports are 443, 8443 for communication to the XMS V/A(s). You’ll notice that you cannot change the SSL traffic configuration as I specified to not to perform any SSL offloading in set 10 above or its under section “Load Balancing IP address for MAM” within the NSG XenMobile 10 wizard.
13: Next add in the XMS ip addr’s of each V/A in your XMS cluster and provide an appropriate name and ports are automated defaulted to 443, 8443.
14: Click continue to finish and then click done and you have now setup and configured all your traffic for XenMobile to route through your NSG V/A and we are performing SSL Bridging in the above scenario.
Twitter
You should follow the XenMobile team on twitter at – https://twitter.com/xenmobile for the very latest on Worx’s apps, updates, upgrades and so much more.
“The following content is a brief and unofficial prerequisites guide to setup, configure and test vGPU technology using XenServer 6.2 SP2+ or XenServer 6.5, XenDesktop 7.6, nVidia GRID K1 or K2 cards and a supported server from either the Citrix or nVidia HCL prior to deploying in a PoC, Pilot or Production environment by the author of this entry. The views expressed here are my own and do not necessarily reflect the views of Citrix.
Shortened Names
XENAPP – xa
XENDESKTOP – xd
XENAPP/XENDESKTOP – xad
VIRTUAL DELIVERY AGENT – vda
VIRTUAL GRAPHICS PROCESSING UNIT – vgpu
GRAPHICS PROCESSING UNIT – gpu
STOREFRONT SERVICES – sfs
VIRTUAL MACHINE – vm
HIGH DEFINITION EXPERIENCE – hdx
XENSERVER – xs
What is vGPU?
It is a logical portion of a physical GPU assigned to a VM to deliver rich graphical applications from either a multi-user or desktop OSes. It is currently only supported with either nVidia GRID K1/K2 cards, compatible HCL server running either XenServer 6.2 SP+ or XenServer 6.5+ with XenApp or XenDesktop 7.6. The GPU resources (Frame buffer) + access time that is allocated to a vGPU assigned to the VM is managed with the help of a vGPU profile e.g K120Q which manages the GPU resources + time in conjunction with the vGPU manager which is installed within Dom0 of the XenServer 6.2 SP1+ or 6.5 host which intern allows for any VM assigned a vGPU to handle and delivery graphical intensive applications e.g AutoCAD Map 3D or Adobe Photoshop CS. For more technical information and an alternative description and overview including a diagram checkout – http://www.nvidia.com/object/virtual-gpus.html on the nVidia website.
The second generation of nVidia GRID cards are called TESLA which make use of the “Maxwell” architecture which includes 3x offerings TESLA M10 (Rack Servers), TESLA M6 (MXM Blade Servers) and TESLA M60 (Rack Servers)
Overview of Citrix HDX vs. HDX 3D Pro
HDX stands of High Definition eXperience and is built upon the ICA protocol which is developed, owned and maintained by Citrix. HDX automatically and dynamically adapts to any changes within the users ICA session end-2-end to ensure that the users experience always comes first and foremost. HDX inspects the computing resources within the data centre e.g. the VM or physical server that the desktop or server VDA is install on, the network and the end-point device to see what computing resources can be leveraged to offload onto to further enhance the users experience. For a technical overview to Citrix’s HDX technologies and policies in XAD 7.6 check out – http://support.citrix.com/proddocs/topic/xenapp-xendesktop-76/xad-hdx-landing.html. Citrix has published document entitled “What is HDX? / Citrix HDX technologies for optimizing the virtualization experience” available at – http://www.citrix.com/content/dam/citrix/en_us/documents/products-solutions/citrix-hdx-technologies.pdf which provides a great introduction into HDX technologies.
Installation & Configuration
1. http://support.citrix.com/article/CTX140603 or refer to point 4 in the above “vGPU Pre-requites & System Requirements” section.
2. NVIDIA GRID Configuration Checks by Jason Southern at nVidia
HDX 3D Pro Policy or Policies
1. I would strongly recommend when you begin your testing of a vGPU VM(s) that you create a new custom policy in Studio and perhaps title it “vGPU HDX 3D Pro” and apply the following sUgGeStEd vGPU HDX 3D Pro policy as described in this nVidia GRID forum article available at – https://gridforums.nvidia.com/default/topic/254/xendesktop-with-nvidia-grid/hdx-policy-for-grid-accelerated-applications/. Why not use my current HDX policy? Firstly this policy is a sUgGeStEd and should be considered as an initial base line to begin testing from and its based off real world field experience from an EMEA nVidia GRID Architecture based in the UK.
2. The following XenDesktop master class from July 2014 will provide you with a great insight into HDX 3D Pro with nVidia GRID cards. This master class is a must if your looking at deploying an HDX 3D Pro with a customers environment to enable the deliver of HDX Rich Graphics to users within LAN and WAN scenarios.
The following content is a brief and unofficial prerequisites guide to setup, configure and test XenServer 6.5 with XAD 7.6 including HDX 3D Pro with a supported server from either the Citrix or nVidia HCL prior to deploying in a PoC, Pilot or Production environment by the author of this entry. The views, opinions and concepts expressed are those by the author of this entry only and do not necessary conform to industry descriptions or best practises.
Shortened Names
XENAPP – xa
XENDESKTOP – xd
XENAPP/XENDESKTOP – xad
VIRTUAL DELIVERY AGENT – vda
VIRTUAL GRAPHICS PROCESSING UNIT – vgpu
GRAPHICS PROCESSING UNIT – vgpu
STOREFRONT SERVICES – sfs
VIRTUAL MACHINE – vm
HIGH DEFINITION EXPERIENCE – hdx
XENSERVER – xs
What’s New
1: Dom0 is now x64
2: vGPU scalability from 64 to 96 vGPU’s sessions per host with the correctly supported HCL server h/w which can support up to 3x nVidia GRID cards.
3: In-memory read-caching enables XS to take advantage of storing a golden image build in the hosts RAM which means guest VM’s boot 3x faster hello faster XAD 7.6 workloads and use cases.
4: Storage improvements include LiVE LUN expansion, tapdisk3 support, device mapper multi-path (updated).
5: Workload Balancing (WLB) is back take a look at – http://blogs.citrix.com/2015/01/29/workload-balancing-wlb-xendesktop-and-xenapp-use-cases/ and http://blogs.citrix.com/2015/01/22/citrix-xenserver-workload-balancing-wlb-why-xendesktop-and-xenapp-customers-really-should-take-note/.
6: For a complete overview checkout – http://blogs.citrix.com/2015/01/13/xenserver-v6-5-whats-new-and-why-you-should-check-it-out/, http://blogs.citrix.com/2015/01/13/xenserver-6-5/.
7: Don’t forget to read through the release notes which is available at – http://support.citrix.com/servlet/KbServlet/download/38334-102-714582/XenServer-6.5.0-releasenotes.pdf.
The following content is a brief and unofficial prerequisites guide to setup, configure and test XenApp 7.6, XernDesktop 7.6 prior to deploying in a PoC, Pilot or Production environment by the author of this entry. The views, opinions and concepts expressed are those by the author of this entry only and do not necessary conform to industry descriptions or best practises.
Shortened Names
XENAPP – xa
XENDESKTOP – xd
VIRTUAL DELIVERY AGENT – vda
LIGHT WEIGHT DIRECTORY PROTOCOL – ldap
ACTIVE DIRECTORY – ad
CERTIFICATE SIGNING REQUEST – csr
CONNECTION LEASING – cl
FULLY QUALIFIED DOMAIN NAME – fqdn
RECEIVER FOR WEB – rfw
CERTIFICATE AUTHORITY – ca
STOREFRONT SERVICES – sfs
PUBLIC KEY INFRASTRUCTURE – pki
NETSCALER GATEWAY – nsg
SECURE TICKET AUTHORITY – sta
DOMAIN NAME SERVER – dns
DYNAMIC HOST CONFIGURATION PROTOCOL – dhcp
FEATURE PACK – fp
2: Sample installation code to insert into a batch script from Citrix eDocs that will install the VDA on Desktop OS as a master image and it will include Citrix Receiver.
The following content is a brief and unofficial prerequisites guide to setup, configure and test XenMobile AppController 9.0 prior to deploying in a PoC, Pilot or Production environment by the author of this entry. The views, opinions and concepts expressed are those by the author of this entry only and do not necessary conform to industry descriptions or best practises.
Shortened Names
XENMOBILE APPCONTROLLER – xac
CERTIFICATE SIGNING REQUEST – csr
FULLY QUALIFIED DOMAIN NAME – fqdn
RECEIVER FOR WEB – rfw
CERTIFICATE AUTHORITY – ca
STOREFRONT SERVICES – sfs
PUBLIC KEY INFRASTRUCTURE – pki
NETSCALER GATEWAY – nsg
XENMOBILE DEVICE MANAGER – xdm
XENMOBILE NETSCALER CONNECTOR – xnc
SECURE TICKET AUTHORITY – sta
DOMAIN NAME SERVER – dns
New & Existing XenMobile AppController (XAC) Admin & User Consoles
1: The NEWEST console is a troubleshooting one which is accessible at https://XAC-FQDN:4443/ControlPoint/support which allows troubleshooting of NetScaler Gateway, XenMobile Device Manager
2: Control Point Admin console – https://XAC-FQDN:4443/ControlPoint/
3: Hidden Admin console – https://XAC-FQDN:4443/admin.
4: Receiver for Web (RfW) provides user access to SaaS, Web-links – https://XAC-FQDN:4443/Citrix/StoreWeb/ natively. You can integrate XAC with StoreFront to enumerate published Windows apps, Sever and Desktop VDI’s from XenApp, XenDesktop 7.x.
2: New troubleshooting and support console that can download logs, perform connectivity tests and upload logs to http://taas.citrix.com. The console is available at – https://XAC-FQDN:4443/ControlPoint/support once you have successful authenticated at https://XAC-FQDN:4443/ControlPoint/. You will need to know the admin access details for NSG, XAC and XDM in order to effectively use this console.
3: Wrapping iOS Worx Apps Video.
4: Wrapping Andriod Worx Apps including covering off how-to sign multiple *.APK files using a BASH script. Refer to the XenMobile 9.0 MDX Toolkit Documentation
– http://support.citrix.com/article/CTX140458 for more information once you have watched this video.
The following content is a brief and unofficial prerequisites guide to setup, configure and test StoreFront 2.5, 2.5.2 prior to deploying in a PoC, Pilot or Production environment by the author of this entry. The views, opinions and concepts expressed are those by the author of this entry only and do not necessary conform to industry descriptions or best practises.
Shortened Names
XENMOBILE APPCONTROLLER – xac
XENDESKTOP – xd
XENAPP – xa
CERTIFICATE SIGNING REQUEST – csr
VDI-IN-A-BOX – viab
FULLY QUALIFIED DOMAIN NAME – fqdn
RECEIVER FOR WEB – rfw
CERTIFICATE AUTHORITY – ca
STOREFRONT SERVICES – sfs
WEB INTERFACE – wif
NETSCALER GATEWAY – nsg
SECURE TICKET AUTHORITY – sta
DOMAIN NAME SERVER – dns
Installing & Deploying StoreFront
1: Review the System Requirements for StoreFront at – http://support.citrix.com/proddocs/topic/dws-storefront-25/dws-system-requirements.html and remember to make a note of the required ports for internal SFS communication & the HTML5 Receiver if your going to deploy it. It is also worth ensuring that you have the correct infrastructure requirements in place e.g version of XenApp, XenDestop e.tc that is supported by StoreFront 2.5 ref – http://support.citrix.com/proddocs/topic/dws-storefront-25/dws-system-requirements-server.html, last but no least ensure your endpoint clients are updated accordingly to the lastest supported Citrix Receiver agent, HTML5 support Web Browser ref – http://support.citrix.com/proddocs/topic/dws-storefront-25/dws-system-requirements-client.html.
2: I would recommend that you download and read through the StroreFront Planning Guide available at – http://support.citrix.com/article/CTX136547, which covers off authentication between WiF and StoreFront, single and high-available deployments between two data centres leveraging a NetScaler Gateway which also includes deployment sizing from 500 through to 10000 users, how-to use features such as KEYWORDS:prefer=”application” when configuring SFS and the document contains a lot of useful information. *
3: Next download https://support.citrix.com/article/CTX133185 which will get your through an architectural overview and how-to install and configure SFS with an SSL certificates, NetScaler Gateway & STA for remote access, joining StoreFront servers to form a StoreFront cluster and much more. *
4: Finally howto customise your StoreFront 2.5 implementation end to end – http://blogs.citrix.com/2014/04/04/customizing-receiver-for-web-2-5/ from background re-branding, pre-announcements (pre-login), server side ASPX cfgs, language support and so much more.
5: *This CTX article is based off StoreFront 2.0 however I believe it still contains very useful information and resources.
Enhance The User’s Experience
A simple SRV record entry added to your DNS can make your users experience all that better and easier as all they need to remember essentially is there organisational email addr, password and optionally organisation specific a soft token e.g Symantec VIP or RSA SecureID.
If using the Citrix Receiver agent when logging in with the above access details it will auto configure the Store information for Citrix Receiver and you be able to launch resources delivered from XenApp, XenDesktop, XenMobile AppController and ViaB and if your where connecting using the agent less method i.e the HTML5 Receiver you will be able to the exact same resources launch directly from within any HTML5 web browser.
How do I enable the App tab by default in RfW, add drop down domains at the login web page, displayed user login id/name instead of display name, how do I hide Active, move the Apps and Desktops tab to an alt location and more so checkout – http://blogs.citrix.com/2014/06/20/receiver-for-web-faq/.
The following content is a brief and unofficial prerequisites guide to setup, configure and test XenApp 7.5, XenDesktop 7.5 prior to deploying in a PoC, Pilot or Production environment by the author of this entry. The views, opinions and concepts expressed are those by the author of this entry only and do not necessary conform to industry descriptions or best practises.
Shortened Names
XENAPPP – xac
FLEXCAST MANAGEMENT ARCHITECTURE – fma
INFRASTRUCTURE-AS-A-SERVICE – IaaS
XENDESKTOP – xd
XENAPP/XENDESKTOP – xad
INDEPENDENT MANAGEMENT ARCHITECTURE – ima
STOREFRONT – sf
HOSTED SHARED DESKTOPS – hsd
VIRTUAL DESKTOP INFRASTRUCTURE – vdi
HOSTED SHARED PUBLISHED WINDOWS APPS – hspwa
RECEIVER FOR WEB – rfw
REMOTE ACCESS – r/a
XenApp 7.5 XenDesktop 7.5 Announcement
Citrix have recently announced XenApp 7.5 which is built upon Flexcast Management Architecture (FMA) and has been available within XenDesktop 7.0, 7.1 within the App Edition license tier. The least releases also brings with it XA hybrid cloud provisioning meaning that SysAdmins now are able to extend there private cloud to IaaS hosted cloud providers (ISP’s) provided they leverage Citrix CloudPlatform which will enable quick scalability and elasticity and without having to learn the ISP’s chosen design, build, provision and management consoles to provision your environment as it’s all integrated into Studio. The announcement can be found at – http://www.citrix.com/news/announcements/jan-2014/citrix-xenapp-7-5-simplifies-windows-app-delivery-for-the-mobile.html and it’s also worth reading up on about the benefits and features of Flexcast technology for XA at – http://www.citrix.com/content/dam/citrix/en_us/documents/products-solutions/xenapp-datasheet.pdf?accessmode=direct.
What’s New & Highlights of XenApp/XenDesktop (XAD) 7.5
1: The platform architecture is now powered by FMA and not Independent Management Architecture (IMA) anymore thus providing enhanced scalability and ease of management through two consoles Studio which is used for deign, building, assigning polices and resources to users and Director which is used for management of user support & troubleshooting.
2: StoreFront 2.5 is included within XenApp and XenDesktop 7.5 app binaries and includes a number of new enhancements including an updated HTML5 Receiver, SDK to apply organisational logic if required and much more.
3: Support for Web Interface (WiF) 5.4 on supported Windows Server OSes.
4: AppDNA is included in Platinum edition.
5: Virtual Graphical Processing Unit (vGPU) and GPU support for supported Windows Desktop & Server OSes.
6: Support for Windows Server 2012 R2 and Windows 8.1 in addition to current supported OSes in XenDesktop 7.0, 7.1.
7: The Citrix Profile management 5.0 is installed silently by default on master images when the Virtual Delivery Agent is installed (Note: You do not have to use Citrix profile management solution).
8: Support for IPv4, IPv6 or dual-stack (IPv4/IPv6) environments from clients to core components.
9: MCS support for Microsoft Key Management System (KMS) activation.
10: For a complete list please check out – http://support.citrix.com/proddocs/topic/xenapp-xendesktop-75/cds-75-about-whats-new.html and also review the XA 7.5 data sheet at – http://www.citrix.com/content/dam/citrix/en_us/documents/products-solutions/xenapp-datasheet.pdf.
Synergy SYN405: Best Practices for Implementing Administering and Troubleshooting Xendesktop 7.5
Pre-requisites, Understanding & How-to Install XenApp 7.5 and enable R/A for your PoC or Custer Demo Environment (DRAFT & MAY CONTAIN ERROR(S))
Coming soon!
The following content is a brief and unofficial prerequisites guide to setup, configure and test XenApp 6.5 prior to deploying in a PoC, Pilot or Production environment by the author of this entry. The views, opinions and concepts expressed are those by the author of this entry only and do not necessary conform to industry descriptions or best practises.
Shortened Names
WEB INTERFACE – xml
STOREFRONT – sf
REMOTE DESKTOP SERVICES – rds
TERMINAL SERVICES – ts
VIRTUAL DELIVERY CONTROLLER – vda