Tag Archives: HDX Broadcast now with Framehawk

What’s new with XenApp/XenDesktop 7.6 Feature Pack (FP3)

The following content is a brief and unofficial prerequisites guide to setup, configure and test XenApp, XenDesktop FP3 prior to deploying in a PoC, Pilot or Production environment by the author of this entry. The views, opinions and concepts expressed are those by the author of this entry only and do not necessary conform to industry descriptions or best practises.

Shortened Names
XENAPP – xa
XENDESKTOP – xd
XENAPP/XENDESKTOP – xad
VIRTUAL DELIVERY AGENT – vda
HIGH DEFINITION EXPERIENCE – hdx
EXPERIENCE 1st – x1
STOREFRONT SERVER – sfs
FEATURE PACK – fp
THINWIRE PLUS – thinwire +
THINWIRE COMPATIBLE – thinwire c
USER EXPERIENCE – ux

What is new in FP3?
0: ++An absolutely MUST read entitled “HDX Graphics Modes – Which Policies Apply to DCR/Thinwire/H.264 – An Overview for XenDesktop/XenApp 7.6 FP3” which is available at – http://support.citrix.com/article/CTX202687 prior to implementing any of the new graphics mode/encoder(s) within XAD 7.6 FP3.
1: Support for Windows 10 Enterprise Edition, in the Standard VDA for Windows Desktop OSes.
2: HDX Broadcast updates include the following:

Framehawk (Admin guide – http://docs.citrix.com/content/dam/docs/en-us/xenapp-xendesktop/xenapp-xendesktop-7-6/downloads/Framehawk%20Administration%20Guide.pdf) virtual display channel is integrated into the standalone VDA package.
Thinwire Compatible Modehttp://docs.citrix.com/en-us/xenapp-and-xendesktop/7-6/xad-hdx-landing/thinwire-compatibility-mode.html also referred to as Thinwire +/Plus is the very latest encoder to deliver a fantastic and rich X1 UX for virtual apps and desktops delivered from Windows Server 2012 R2, Windows 8.1 and 10 powered by XAD 7.6 FP3. To learn more about check out – https://www.citrix.com/blogs/2015/10/09/a-big-leap-in-ica-protocol-innovation-for-citrix/. Set the “Use video codec for compression” to “Do not use” which will force the use of Thinwire Compatibility Mode by default for user ICA/HDX sessions on XAD 7.6 FP3.

HDX Framehawk Performance in XenApp and XenDesktop 7.6 FP3

3: ++Updated Studio built-in policies ref – http://docs.citrix.com/en-us/xenapp-and-xendesktop/7-6/xad-policies-article/xad-policies-templates.html which include the following:

– Very High Definition User Experience+
– High Server Scalability *+
– High Server Scalability-Legacy OS **
– Optimized for WAN *+
– Optimized for WAN-Legacy OS **
– Security and Control

+ New or adjusted to meet today’s new requirements
* Windows 8.1-10, Windows Server 2012 R2
** Windows 7, Windows Server 2008 R2

4: Support for signature devices (Wacom) and drawing tablets which can be applied by adding the following USB device policy settings ref – http://docs.citrix.com/en-us/xenapp-and-xendesktop/7-6/xad-policies-article/xad-policies-settings-wrapper/xad-policies-settings-ica/xad-policies-settings-usb.html.
5: The HDX 3D Pro VDA used to deliver HDX Rich Graphical apps now supports full-screen apps including 3D and gaming apps within single monitor for ICA sessions.
x: For a full and compete list with accurate descriptions and overviews please check out – http://docs.citrix.com/en-us/xenapp-and-xendesktop/7-6/xad-whats-new.html.

What’s new with StoreFront 3.0.1?
This release contains a number of fixed issues ref – http://docs.citrix.com/en-us/storefront/3/sf-about-30/fixed-issues.html including support for TLS 1.0-1. Please beware that SSL 3.0 is NOT supported and Citrix strongly recommends that you do not use it.

HDX Broadcast now with Framehawk

The following content is a brief and unofficial prerequisites guide to setup, configure and test HDX Broadcast now with Framehawk with XAD 7.6 FP2 prior to deploying in a PoC, Pilot or Production environment by the author of this entry. The views, opinions and concepts expressed are those by the author of this entry only and do not necessary conform to industry descriptions or best practises.

Shortened Names
XENAPP – xa
XENDESKTOP – xd
XENAPP/XENDESKTOP – xad
VIRTUAL DELIVERY AGENT – vda
HIGH DEFINITION EXPERIENCE – hdx
UNIFIED COMMUNICATIONS – uc
MICROSOFT – ms
NETSCALER GATEWAY – ns(g)
INDEPENDENT COMPUTING ARCHITECTURE – ica
FEATURE PACK – fp
NETSCALER UNIFIED GATEWAY – nug
NETSCALER GATEWAY – nsg
EXPERIENCE 1st – x1
STOREFRONT SERVER – sfs

What is Framehawk?
It forms part of HDX Broadcast technologies within the High Definition eXperience (HDX) stack providing an enhanced X1 UX over broadband wireless, cellular connections where users experience the effects of packet loss, congestion, latency and jitter. The technology came from the Framehawk acquisition made by Citrix in 2014 ref – https://www.citrix.com/news/announcements/jan-2014/citrix-acquires-framehawk.html. Framehawk is defined as light weight frame buffer protocol (UDP based) and adds a new virtual channel to the ICA protocol. The initial release is targeted at users connected to XAD 7.6 FP2 via TRU networks however as of 14/08/2015 ref * Framehawk is now also available for users running the latest up to date iOS Receiver – http://blogs.citrix.com/2015/08/03/receiver-for-ios-6-0-now-available-with-framehawk-support/ utilising NetScaler Gateway 11.0 build 62.10 ref the following CTX blog which also includes details surrounding the initial Framehawk release within XAD 7.6 FP2 at – *http://blogs.citrix.com/2015/06/30/our-first-release-of-framehawk-technologies/.

New Use Cases for Framehawk
The following official Citrix blog articles provides insight into some of the use cases for Framehawk – http://blogs.citrix.com/2015/08/17/new-use-cases-for-framehawk/.

HDX Framehawk Performance in XenApp and XenDesktop 7.6 FP3

Demonstration of Citrix (HDX Broadcast now with Framehawk) vs. VMware

Pre-requisites & System Requirements for Deploying HDX Broadcast now with Framehawk (Draft + The Basic’s Only)
0: The HDX Broadcast now with Framehawk admin guide is available at – http://docs.citrix.com/content/dam/docs/en-us/xenapp-xendesktop/xenapp-xendesktop-7-6/downloads/Framehawk%20Administration%20Guide.pdf which I would strongly suggest that you read through before undertaking any type of PoC or internal testing of Framehawk’s capabilities within your own home lab, organisation demo environment.
1: You need to download the XAD 7.6 FP2 components from http://www.citrix.com/downloads.html. Also download and the firmware update for NetScaler Unified Gateway 11.0 build 62.10** to upgrade your NUG V/A.Note: The current supported Citrix Receivers (update 22/08/2015) are the Windows Receiver 4.3 or iOS Receiver 6.0.
2: Download the DisplayStateGUI.exe * tool from http://blogs.citrix.com/2015/08/17/got-framehawk-weve-got-remote-access-tips-and-tricks/ its a good read by way so be sure to read through that official CTX blog articles aswell prior to deploying Framehawk in your Home/Test lab or for a customer PoC.
3: In your Citrix test or home lab environments snapshot all the relevant XAD 7.6 infrastructure components that requires which an update which is most rior to proceeding. This is typically a common leading best practise so that you revert back in the unlikely event of a failure or corruption of any components during the infrastructure update.
4: Once the updates have been completed successfully installed and you’ve rebooted your compoments seperately in an agreed maintenance window the launch Citrix Studio upon a successful reboot and create a new policy selecting the Framehawk policies and adding them to your test user(s) or group(s). It is not recommended to apply this HDX policy to all users within your Site but only those whom are experiencing high packet loss ref page 12 of the Framehawk Admin Guide. Also be sure to carefully review and understand the provided technical overview of each policy setting by reading the policy description.TIP: Type in frame in the search window to find the Framehawk policies in Studio quicker.
5: Also make sure that your install and update the server, desktop VDA’s within your template images or create a new set of template(s) for your desktop and server OSes. It’s your choice :-).
6: I’d suggest that you utilise a Windows end-point for your initial tests of Framehawk, so navigate to http://receiver.citrix.com which should auto detect your Windows endpoint and recommend that you download and install Citrix Receiver 4.3 for your Windows OS.
7: Once the Windows Citrix Receiver 4.3 has successfully installed and configure Receiver to point to your Citrix test or home lab environment and begin testing :-). TIP: Why not setup a DNS SRV record for e-mail based discovery check out – http://docs.citrix.com/en-us/storefront/3/sf-plan/sf-plan-user-access.html.
8: Once your have configured Receiver a lunch a destkop and run DisplayStateGUI.exe * and also login into the new and update Director to check that your launch ICA/HDX session is in fact utilising using Framehawk and not DRC or the SuperCodec.
9: Once your happy proceed to snapshotting your NUG V/A and begin the firmware upgrade from your exsiting NUG build to the current supported firmware version which is 11.0 build 62.10**.
10: Once your have upgrade your NUG V/A and it is functioning as expected then proceed with the following to enable delivery of HDX Broadcast now with Framehawk via your NetScaler (Unfied) Gateway.
11: Enable DTLS in the settings of the VPN virtual server, enable and open 443 on TCP/UDP and unbind and rebind the SSL cert-key pair this second part is mandatory for more detail ref 16 of the Framehawk admin guide.
12: Deploy XAD 7.6 FP2 as your typically would utilising either the built-in wizards, manually using AppExpert e.t.c
13: Once its is successfully configured navigate to your external gateway FQDN and login to ensure that you can successfully authenticate and access your RfW powered by StoreFront 3.0 with the unified experience enabled ref – http://docs.citrix.com/en-us/storefront/3/sf-manage/sf-receiver.html. Now logout and return to the NUG Admin WebUI.
14: Now complete the following steps within the NUG Web AdminUI to enable and allow Framehawk ICA/HDX sessions through your NetScaler Unified Gateway V/A:

– Click configuration tab -> NS Gateway -> Virtual Servers now click “Edit” then click “More”
– Select to enable DTLS then click “Ok”
– Now within the VPN Server screen click e.g “1 Server Certificate”
– Write down the name of the certificate
– Select your server cert and the click on Unbind above from the list of menu options and then save/close
– You be returned to the VPN Server screen and there will be NO certs that is normal. Now click on “No Server Certificate” to reopen it
– Click on the + sign
– Find your certificate within the list and click “Select” then when prompted click “Bind”.
– Ignore and click OK on the warning error message entitled “No usable ciphers configured on the SSL vserver/serivce

15: Begin testing using Windows Receiver 4.3 from any supported Windows end-point.
16: If you wanted to enable and allow Framehawk access from iOS devices running Receiver 6.0 then please complete the following:

– On your SFS access App_Data dir of your Store in C:\inetpub\wwwroot\Citrix\Store\App_Data\
– Open the file entitled default.ica
– Under the [WFClient] section within the file add the following line of code Framehawk=On which should be under ProxyUseFQDN=Off
– Click “Save”

17: Begin testing using Citrix Receiver iOS 6 on an iOS device.
18: If you have downloaded the initial Framehawk Admin Guide is doesn’t including the remote access setup and configuration so please re-download the admin guide at – http://blogs.citrix.com/2015/08/17/got-framehawk-weve-got-remote-access-tips-and-tricks/. It well worth a re-read in my view to better understand Framehawk.

SYN230: HDX update: What’s new
If you want to learn what’s new and all the updates to Citrix HDX i’d suggest that you watch the following Citrix Synergy 2015 session entitled “SYN230: HDX update: What’s new”.

Supported Citrix Receivers
1: The current supported Citrix Receivers for Framehawk are the Windows Receiver 4.3+ and the iOS Receiver.
2: You can download either Receiver by visiting your OSes app store of by navigating to – http://receiver.citrix.com.
3: The current up to date Citrix Receiver feature matrix is available at – https://www.citrix.com/content/dam/citrix/en_us/documents/products-solutions/citrix-receiver-feature-matrix.pdf.